Register now and look forward to many interesting and suitable positions and projects. Strong support for all launch activities On site analysis for electrical failures and software failures Perform joint pre-analysis and pre-rejection of parts at customer locations and support activities to reduce part returns and related costs Coordinate the transfer of return parts from related customer location(s)/warranty center(s) to the appropriate production location and, if applicable, register complained parts in the related system Propose and implement containment actions and corrective measures, trace affected products, notify impacted customers, analyze lessons learned and preventive actions Coordinate and control sorting, rework and reflash actions - where necessary with support from third-party service providers - in alignment with the customer and the involved Business Units to minimize production disruptions and reduce costs Manage and coordinate if applicable to a Customer Service Engineer Team across multiple customer locations within an assigned region Support product changes, customer plant trial runs, and safe launch activities at customer facilities Perform and coordinate reflash activities at customer plant Quality-Project-Experience Experience in Customer Relationship Management Language: German and Englisch required, Portuguese an advantage Experienced in SW and electrical analysis tools (CANoe, OBD tools etc.)
Register now and look forward to many interesting and suitable positions and projects. Strong support for all launch activitiesOn site analysis for electrical failures and software failuresPerform joint pre-analysis and pre-rejection of parts at customer locations and support activities to reduce part returns and related costsCoordinate the transfer of return parts from related customer location(s)/warranty center(s) to the appropriate production location and, if applicable, register complained parts in the related systemPropose and implement containment actions and corrective measures, trace affected products, notify impacted customers, analyze lessons learned and preventive actionsCoordinate and control sorting, rework and reflash actions - where necessary with support from third-party service providers - in alignment with the customer and the involved Business Units to minimize production disruptions and reduce costsManage and coordinate if applicable to a Customer Service Engineer Team across multiple customer locations within an assigned regionSupport product changes, customer plant trial runs, and safe launch activities at customer facilitiesPerform and coordinate reflash activities at customer plant Quality-Project-ExperienceExperience in Customer Relationship ManagementLanguage: German and Englisch required, Portuguese an advantageExperienced in SW and electrical analysis tools (CANoe, OBD tools etc.)
Denn durch unsere intensiven Beziehungen und Netzwerke über alle Industriebranchen hinweg vermitteln wir Ihnen als Engineering-Fachleuten spannende Projekte und attraktive Positionen. Ganz nach Ihren Interessen und abhängig von Ihren Erfahrungen und Qualifikationen. Sie profitieren dabei von einer professionellen Betreuung von der ersten Ansprache bis zum Antritt Ihres neuen Projektes bzw.
Denn durch unsere intensiven Beziehungen und Netzwerke über alle Industriebranchen hinweg vermitteln wir Ihnen als Engineering-Fachleuten spannende Projekte und attraktive Positionen. Ganz nach Ihren Interessen und abhängig von Ihren Erfahrungen und Qualifikationen. Sie profitieren dabei von einer professionellen Betreuung von der ersten Ansprache bis zum Antritt Ihres neuen Projektes bzw.
Denn durch unsere intensiven Beziehungen und Netzwerke über alle Industriebranchen hinweg vermitteln wir Ihnen als Engineering-Fachleuten spannende Projekte und attraktive Positionen. Ganz nach Ihren Interessen und abhängig von Ihren Erfahrungen und Qualifikationen. Sie profitieren dabei von einer professionellen Betreuung von der ersten Ansprache bis zum Antritt Ihres neuen Projektes bzw.
Denn durch unsere intensiven Beziehungen und Netzwerke über alle Industriebranchen hinweg vermitteln wir Ihnen als Engineering-Fachleuten spannende Projekte und attraktive Positionen. Ganz nach Ihren Interessen und abhängig von Ihren Erfahrungen und Qualifikationen. Sie profitieren dabei von einer professionellen Betreuung von der ersten Ansprache bis zum Antritt Ihres neuen Projektes bzw.
Experience in the configuration of automation systems is an advantage Experience MATLAB Strong English skills, German proficiency is beneficial Does this position match your skills and career goals? We look forward to receiving your application for the position of Integration Engineer (m/f/d) – Erlangen .
YOUR TASKS: As part of the Electrical Grid Integration department, the job position consists of testing and adjusting the simulation models to make sure NX products are grid compliant.The main tasks to be performed are: Analysis and evaluation of the simulation models for internal quality checks.
YOUR TASKS: As part of the Electrical Grid Integration department, the job position consists of testing and adjusting the simulation models to make sure NX products are grid compliant.The main tasks to be performed are: Analysis and evaluation of the simulation models for internal quality checks.
#Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany : Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
#Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany: Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
At the earliest possible date we are looking forAssembly Electrical Degree in Electrical Engineering related and finished with a Bachelor Degree Minimum of 3 years’ experience in similar position Capable of executing solder activityCapable of using VOM meter Assembler-Mechanics Must be able to read pneumatic and electrical schematics.
Register now and look forward to many interesting and suitable positions and projects. Support of GSR ISA homologation activities focus on Intelligent Speed Limit Assist Development of test processes/procedures including measurement tools Real vehicle tests of Drivers Assistance Systems with appropriate validation tools Planning, coordination and preparation of test vehicles ADAS sign-off tests of EU vehicles Support and execution of proving-ground tests Support and drive development work at tier-1 level Analysis of test data, identification of improvement potential Analysis of competitor vehicles and definition of future sensor strategies Degree in Electrical, Mechanical, Mechatronic Engineering or similar Experience in similar position at tier-1 or OEM and in specification/development and validation of ADAS Systems Experience with validation tools (DGPS, datalogging, etc.)
Register now and look forward to many interesting and suitable positions and projects. Support of GSR ISA homologation activities focus on Intelligent Speed Limit Assist Development of test processes/procedures including measurement tools Real vehicle tests of Drivers Assistance Systems with appropriate validation toolsPlanning, coordination and preparation of test vehicles ADAS sign-off tests of EU vehicles Support and execution of proving-ground tests Support and drive development work at tier-1 level Analysis of test data, identification of improvement potentialAnalysis of competitor vehicles and definition of future sensor strategies Degree in Electrical, Mechanical, Mechatronic Engineering or similarExperience in similar position at tier-1 or OEM and in specification/development and validation of ADAS Systems Experience with validation tools (DGPS, datalogging, etc.)Ability to develop and set up standard test procedures and processes Experience to support and drive development work at tier-1 level would be a plus Familiar with ADAS system hard- and software architecture Willingness to work in intercultural teams and good command of English language 30 days leave per yearA highly motivated team and an open way of communication A very renowned companyDynamic and innovative market environment Ihr Kontakt Ansprechpartner Annika Chrysant Referenznummer 863151/1 Kontakt aufnehmen E-Mail: annika.chrysant@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Do you work in a structured manner, are you reliable and ensure that our customers always receive the best possible support? Then join our team! In this position, you will be responsible for looking after and supporting our customers, providing training and ensuring that our machines and processes fulfil the high expectations of the Semiconductor Industry - all in a high-precision environment that also includes working in clean rooms.
Supports and may participate in sales process including sales calls, presentations and qualification of customers; may attend trade shows and conferences as directed by management. This position requires up to 30% travel by public transportation including airlines. A valid passport and drivers’ license are required. Your Qualifications Bachelor’s Degree in Business or Engineering 6 years’ related experience in engineering or sales of packaging machines.
-Nr. 5984 Eintrittsdatum ab sofort Einsatzort Wolmirstedt Beschäftigungsausmass in Vollzeit In dieser Position bieten wir Ihnen eine spannende und abwechslungsreiche Aufgabe in einem innovativen und internationalen Umfeld mit großen Entscheidungsspielräumen und einem hohen Maß an Eigenverantwortung.
Supports and may participate in sales process including sales calls, presentations and qualification of customers; may attend trade shows and conferences as directed by management. This position requires up to 30% travel by public transportation including airlines. A valid passport and drivers’ license are required. Your Qualifications Bachelor’s Degree in Business or Engineering 6 years’ related experience in engineering or sales of packaging machines.
Stellenbeschreibung The vacancy is a software development position for aircraft control and monitoring systems. You will join a team of engineers designing operating software and application software for embedded systems in safety-critical equipment, which is working on next-generation controllers for more electrical aircrafts.
(Pneumatic system design, servo control mechanism, robust structure.)Experienced in method of machining, tolerance analysis and user-friendly design.Familiar with CAD and drawing PDM tool (SolidWorks, Inventor etc.).Familiar with FEA analysis.Good ERP concept and BOM maintenance experience.Fluent in English speaking and writing.More than 3 years working experience Preferred qualification: Experience of serving at similar position of semiconductor process equipment industry.Having the fact to work with software, electrical department to complete a design project.Experience to work with OEM/ODM supplier.Basic concept of thermal conduction.
In this position you will work with applications engineers, product engineers and account managers to design and offer Leybold service and solutions that helps clients supercharge their process efficiencies.
Stellenbeschreibung We are looking for the München location. Your Tasks Focus of this position is the development of modifications and the MRO support of the Do328 in-service aircraft (legacy). This includes the design and installation of electrical and mechanical systems.Perform and validate physical design and installation of systems into airframe with CAD and according DMU processes and fulfilling given installation requirements.
Proactive participation in all phases of software development from feasibility studies through design,development, testing and bug fixing and maintenanceCollaboration within the Scrum-TeamsIndependent interaction with internal framework manufacturersBased on requirements and models, definition of software architecture, design and specifications, ultimately leading to implementationParticipation in the definition of work packages, their estimation and planning in a sprint-based agile environmentAdherence to a software development process including contribution to written deliverables and documentation Degree in a software related field such as software or electrical engineering or similarHands-on experience as Software Engineer, preferred in the regulated environment such as the medical device industryYears hands- on experience with C++ and Linux from the last project or positionStrong with Linux DockersExperience with CAN busSoftware architecture would be advantageous Internal career opportunities World-renowned biotech company Ihr Kontakt Referenznummer 865145/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Minimum qualification: Experienced in designing electrical system of an automation machine covering component survey, cost evaluation, schematic planning, system integration.Familiar with CAD and drawing PDM tool (AutoCAD, E3, etc).Background of PLC or related PC based coding skill.Good ERP concept and BOM maintenance experience.Fluent in English speaking and writing.More than 3 years working experience. Preferred qualification: Experience of serving at similar position of semiconductor process equipment industry.Familiar with SEMI S22 standard.Familiar with controller tuning of actuators and optimizing control system.
You develop concepts and participate in feasibility studies to meet technical requirements You perform and take ownership of specific software development tasks, ensuring reviews using checklists and templates You lead work package definition, estimation, and planning, and enhance or document SW unit specifications and designs You review designs and contribute to the SW architecture, defining quality attributes and staying updated with technology trends You conduct root-cause analysis of complex issues and provide bug fixes for post-market software releases You ensure compliance with processes, propose improvements, and stay informed about regulatory and market standards Education in a software related field such as software or electrical engineering Industry experience Proven experience as a Software Engineer with a strong focus on Rust development Solid understanding of Rust's core concepts, including ownership, borrowing, and lifetimes Experience with asynchronous programming in Rust (e.g., using async/await) Familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx) Experience with Linux and Dockers Internal career opportunities World renowned pharmaceutical company International and diverse environment Ihr Kontakt Referenznummer 865359/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
You develop concepts and participate in feasibility studies to meet technical requirementsYou perform and take ownership of specific software development tasks, ensuring reviews using checklists and templatesYou lead work package definition, estimation, and planning, and enhance or document SW unit specifications and designsYou review designs and contribute to the SW architecture, defining quality attributes and staying updated with technology trendsYou conduct root-cause analysis of complex issues and provide bug fixes for post-market software releasesYou ensure compliance with processes, propose improvements, and stay informed about regulatory and market standards Education in a software related field such as software or electrical engineering Industry experienceProven experience as a Software Engineer with a strong focus on Rust developmentSolid understanding of Rust's core concepts, including ownership, borrowing, and lifetimesExperience with asynchronous programming in Rust (e.g., using async/await)Familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx) Experience with Linux and Dockers Internal career opportunities World renowned pharmaceutical companyInternational and diverse environment Ihr Kontakt Referenznummer 865359/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Wir arbeiten an den wegweisenden Technologien von morgen – sei es im autonomen Fahren, Elektromobilität, Connectivity, Infotainment oder darüber hinaus. Sichere Dir die Pole-Position und starte mit uns durch! Was Dich erwartet Aufbau und Pflege von Daten- und KI-Workflows in Cloud- oder On-Prem-UmgebungenUnterstützung bei der Automatisierung von Trainings- und DeploymentschrittenAnalyse und Aufbereitung von Fahrzeug- und ProzessdatenZusammenarbeit mit Data Scientists und SoftwareentwicklernWeiterentwicklung bestehender Datenplattformen und Analysewerkzeuge Das bringst Du mit Erfahrung in Datenverarbeitung, Cloud- oder SoftwareprojektenKenntnisse in einer Programmiersprache (z.
Unit-Tests, Hardware-in-the-Loop, Regressionstests) Enge Zusammenarbeit mit Hardware, Produktmanagement, Qualität, Produktion und Service DEIN PROFIL- WAS WIR WIRKLICH ERWARTEN Mehrjährige Berufserfahrung in der Embedded Software Entwicklung in Rust und C Sehr gutes Verständnis für Mikrocontroller-Architekturen und systemnahe Programmierung Sicherer Umgang mit Git und strukturiertem Konfigurationsmanagement Erfahrung mit Toolchains, Cross-Compilern und sauberen Build-Prozessen Analytische Denkweise, hohe Eigenverantwortung, Hands-on-Mentalität Anspruch an Codequalität, Stabilität und Wartbarkeit Sehr gute Deutsch- und Englischkenntnisse WAS DIESE POSITION BESONDERS MACHT Deine Software ist Teil realer Serienprodukte – kein internes Tool, kein Prototyp Du arbeitest an Systemen, die jahrelang zuverlässig im Feld laufen müssen Technische Entscheidungen werden hier nicht wegdelegiert Kurze Entscheidungswege, direkter Einfluss, keine Konzernpolitik WAS WIR BIETEN Technisch anspruchsvolle Produkte statt Spielwiesen Gestaltungsspielraum ab Tag 1 Direkter Einfluss auf Produktgenerationen Attraktive Vergütung und stabiles Umfeld Idealer Standort im Rhein-Main-Gebiet (Wiesbaden, Mainz, Frankfurt, Gießen, Koblenz) BEWERBUNG Wenn du Embedded Systems nicht nur programmieren, sondern beherrschen willst, dann bist du hier richtig. karriere(at)hydrotechnik.com Ihr Ansprechpartner bei der Hydrotechnik ist Elisa Heuser +49 6431 4004-727
Make your mark. Product Quality Engineer Bitte beachte, dass diese Position im Rahmen unseres hybriden Arbeitsmodells in München angesiedelt ist. Umzugshilfe wird nicht angeboten. Folgende Abenteuer warten bei Schleich auf dich: Sicherstellung der Quality Gates im NPI‑Prozess und Einhaltung aller definierten Qualitätsanforderungen Nachweis der Produktkonformität gemäß gesetzlichen Vorgaben, Normen und internen Spezifikationen Durchführung und Moderation von Risikoanalysen (z.
LEYBOLD USA INC. is an Equal Opportunity Employer – M/F/Disabled/Veterans #UUY#LI-HybridJob location This position provides a hybrid working model, enabling you to divide your time between remote work and on-site presence at Leybold USA Inc. in Export, Pennsylvania, United States following your training.
LEYBOLD USA INC. is an Equal Opportunity Employer – M/F/Disabled/Veterans #UUY#LI-HybridJob location This position provides a hybrid working model, enabling you to divide your time between remote work and on-site presence at Leybold USA Inc. in Export, Pennsylvania, United States following your training.
Register now and look forward to many interesting and suitable positions and projects. Design and implementation of BCU-based control systems for high-voltage direct current (HVDC) transmission systems Development and integration of control functions in DIGSI and verification of these functions in hardware-in-the-loop (HiL) test environments Creation of design specifications, technical documentation, and effort estimates Clarification of technical requirements within the project team as well as with customers and suppliers Conducting training sessions and knowledge sharing with colleagues and customers Remote support during commissioning and servicing of HVDC systemsDesign and Implementation of BCU-based Steering System for Hochspanungs-Gleichstrom-Übertragungssysteme (HVDC) University degree in electrical engineering with a focus on power engineering and relevant, in-depth experience in application Sound knowledge of the parameterization of Bay Control Units (BCUs), preferably SIPROTEC 5 devices with DIGSI and CFC (Continuous Flow Chart) Experience in implementing the IEC 61850 standard for substation control and data exchange with higher-level automation and SCADA systems Deep understanding of high-voltage technology, protection and control schemes, and automated control sequences Good knowledge of the secondary interfaces of high-voltage components such as switchgear, transformers, and current and voltage transformers (CTs and VTs) Native-level English skills; fluent German is an advantage You benefit from exclusive access to interesting companies and exciting projects in collaboration with Hays as a solid and stable partner Compensation in accordance with the industry's collective agreement (IGZ-DGB) Annual vacation entitlement of 30 days Working time account with the option to pay overtime or take time off in lieu Professional and trusting collaboration Ihr Kontakt Ansprechpartner Marco Strötker Referenznummer 859208/1 Kontakt aufnehmen E-Mail: marco.stroetker@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Register now and look forward to many interesting and suitable positions and projects. Analyze system requirements and assess the feasibility of testing in simulated environments as well as in vehicles Design and develop test cases for system requirements, particularly for IVI systems including navigation, telematics, and streaming services Execute integrated system tests on test benches and in-vehicle environments Take ownership of key test milestones, such as quality audits and final release gate checks for new vehicle platforms Collaborate closely with Tier-1 suppliers and coordinate activities with our R&D headquarters in Korea Track issues and manage bug fixes using JIRA, ensuring alignment with vehicle line timelines and software release plan Review and challenge technical solutions with a focus on system performance and market competitiveness Identify improvement opportunities based on European market trends and actively support their implementation Bachelor’s or Master’s degree in Computer Science, Engineering, Electrical Engineering, or a related field Practical experience conducting driving tests within the EU region, ideally in the area of automotive infotainment validation Experience in system validation, preferably covering navigation, connected car services, and streaming applications Familiarity with configuration management and version control tools Basic knowledge of data analytics is an advantage Strong planning and organizational skills with a structured working approach High level of flexibility and motivation to work in an international and cross-cultural environment Very good command of the English language, both written and spoken Willingness to travel and conduct driving tests; valid European driving license (Category B) required Pleasant working atmosphere Challenging and varied tasks in a promising and innovative industry Dynamic and innovative market environment A highly motivated team and an open communication styleAngenehmes Arbeitsklima Ihr Kontakt Ansprechpartner Annika Chrysant Referenznummer 858521/1 Kontakt aufnehmen E-Mail: annika.chrysant@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Register now and look forward to many interesting and suitable positions and projects. Analyze system requirements and assess the feasibility of testing in simulated environments as well as in vehiclesDesign and develop test cases for system requirements, particularly for IVI systems including navigation, telematics, and streaming servicesExecute integrated system tests on test benches and in-vehicle environmentsTake ownership of key test milestones, such as quality audits and final release gate checks for new vehicle platformsCollaborate closely with Tier-1 suppliers and coordinate activities with our R&D headquarters in KoreaTrack issues and manage bug fixes using JIRA, ensuring alignment with vehicle line timelines and software release planReview and challenge technical solutions with a focus on system performance and market competitivenessIdentify improvement opportunities based on European market trends and actively support their implementation Bachelor’s or Master’s degree in Computer Science, Engineering, Electrical Engineering, or a related fieldPractical experience conducting driving tests within the EU region, ideally in the area of automotive infotainment validationExperience in system validation, preferably covering navigation, connected car services, and streaming applicationsFamiliarity with configuration management and version control toolsBasic knowledge of data analytics is an advantageStrong planning and organizational skills with a structured working approachHigh level of flexibility and motivation to work in an international and cross-cultural environmentVery good command of the English language, both written and spokenWillingness to travel and conduct driving tests; valid European driving license (Category B) required Pleasant working atmosphereChallenging and varied tasks in a promising and innovative industryDynamic and innovative market environmentA highly motivated team and an open communication styleAngenehmes Arbeitsklima Ihr Kontakt Ansprechpartner Annika Chrysant Referenznummer 858521/1 Kontakt aufnehmen E-Mail: annika.chrysant@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Register now and look forward to many interesting and suitable positions and projects. Design and implementation of BCU-based control systems for high-voltage direct current (HVDC) transmission systemsDevelopment and integration of control functions in DIGSI and verification of these functions in hardware-in-the-loop (HiL) test environmentsCreation of design specifications, technical documentation, and effort estimatesClarification of technical requirements within the project team as well as with customers and suppliersConducting training sessions and knowledge sharing with colleagues and customersRemote support during commissioning and servicing of HVDC systemsDesign and Implementation of BCU-based Steering System for Hochspanungs-Gleichstrom-Übertragungssysteme (HVDC) University degree in electrical engineering with a focus on power engineering and relevant, in-depth experience in applicationSound knowledge of the parameterization of Bay Control Units (BCUs), preferably SIPROTEC 5 devices with DIGSI and CFC (Continuous Flow Chart)Experience in implementing the IEC 61850 standard for substation control and data exchange with higher-level automation and SCADA systemsDeep understanding of high-voltage technology, protection and control schemes, and automated control sequencesGood knowledge of the secondary interfaces of high-voltage components such as switchgear, transformers, and current and voltage transformers (CTs and VTs)Native-level English skills; fluent German is an advantage You benefit from exclusive access to interesting companies and exciting projects in collaboration with Hays as a solid and stable partnerCompensation in accordance with the industry's collective agreement (IGZ-DGB)Annual vacation entitlement of 30 daysWorking time account with the option to pay overtime or take time off in lieuProfessional and trusting collaboration Ihr Kontakt Ansprechpartner Marco Strötker Referenznummer 859208/1 Kontakt aufnehmen E-Mail: marco.stroetker@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Register now and look forward to many interesting and suitable positions and projects. Independent design of control and protection systems for high-voltage direct current (HVDC) transmission systemsImplementation of control software in MATLAB/SIMULINK and verification using simulation tools and real-time test environmentsPreparation of related design specifications, documentation, and effort estimationsClarification of technical requirements within project teams as well as with customers and suppliersRemote support during commissioning and in service cases Completed university degree in Electrical Engineering with a focus on power engineering or control engineering, along with relevant professional experienceStrong knowledge of converter and high-voltage technology, as well as plant, control, and automation engineeringSolid MATLAB/SIMULINK skills, including model-based implementation and verificationExperience in engineering automation systems, preferably SIMATIC TDC / S7Very good command of EnglishGerman language skills desirable You benefit from exclusive access to interesting companies and exciting projects in cooperation with Hays as a solid and stable partnerRemuneration in accordance with the industry collective agreement (GVP)Annual vacation entitlement of 30 daysWorking time account with the option of overtime pay or time off in lieuProfessional and trusting cooperation Ihr Kontakt Referenznummer 860505/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
At the earliest possible date we are looking for...Master Degree in Electrical Engineering Minimum of 5 years’ experience in similar position Experience using CAD ZUKEN e3 or a similar CAD Software Experience using SAP Experience using MS Office Very good English skills Excellent communication skills in both, verbal and writing Ideally Semiconductor Equipment Experience
Register now and look forward to many interesting and suitable positions and projects. Independent design of control and protection systems for high-voltage direct current (HVDC) transmission systems Implementation of control software in MATLAB/SIMULINK and verification using simulation tools and real-time test environments Preparation of related design specifications, documentation, and effort estimations Clarification of technical requirements within project teams as well as with customers and suppliers Remote support during commissioning and in service cases Completed university degree in Electrical Engineering with a focus on power engineering or control engineering, along with relevant professional experience Strong knowledge of converter and high-voltage technology, as well as plant, control, and automation engineering Solid MATLAB/SIMULINK skills, including model-based implementation and verification Experience in engineering automation systems, preferably SIMATIC TDC / S7 Very good command of English German language skills desirable You benefit from exclusive access to interesting companies and exciting projects in cooperation with Hays as a solid and stable partner Remuneration in accordance with the industry collective agreement (GVP) Annual vacation entitlement of 30 days Working time account with the option of overtime pay or time off in lieu Professional and trusting cooperation Ihr Kontakt Referenznummer 860505/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
As an equal opportunity employer, we welcome applicants of all genders, ethnicities, ages, religions and backgrounds to apply for our open positions.
As an equal opportunity employer, we welcome applicants of all genders, ethnicities, ages, religions and backgrounds to apply for our open positions.
Your Responsibilities: Design of BCU-based substation control systems for high voltage direct current (HVDC) systems Implementation of control software using simulation tools and real-time test environments Verification and validation of control solutions in simulated and real-time environments Preparation of design specifications and technical documentation Creation of effort estimations for project planning purposes Clarification of technical requirements within cross-functional project teams Coordination and alignment with customers and suppliers on technical matters Remote support during commissioning of HVDC systems Providing remote service and troubleshooting support for HVDC installations Your Profile: University degree in electrical engineering with a focus on energy technology First professional experience in a relevant field Proficiency in parameterisation of bay control units (BCUs), ideally SIPROTEC 5 devices with DIGSI and CFC (Continuous Flow Chart) Experience in implementing the IEC 61850 standard for substation control and data exchange with higher-level automation and SCADA systems Solid understanding of high voltage and substation technology as well as the design of interlocking schemes and automated control sequences Good knowledge of secondary interfaces of high voltage components such as switching devices, transformers, CTs and VTs Very good English language skills; proficiency in German is an advantageStrong analytical and problem-solving abilities Excellent communication skills in cross-functional and international team environments Structured and detail-oriented working approach Ability to quickly adapt to new technologies and processes High level of initiative and a hands-on mentality Your Benefits: What our client offers: Responsible position in a future-oriented company Creative freedom for sustainable innovations Training opportunities and career prospects We support you on your journey: Above-average pay Permanent employment contract 30 days of annual leave Opportunity to be taken on permanently by the client Employee referral bonus Christmas and holiday bonus Personal support and guidance Does this sound like you?
#Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany : Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
This is an excellent opportunity for an experienced professional who wants to take on a technically challenging role with strong long-term growth potential. This position focuses exclusively on civil and structural engineering (not electrical) and offers a steep learning curve with exposure to a wide range of design and construction activities, including civil works related to Building Management Systems (BMS).
#Holiday: We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #OneCompany: Stronger together – with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture.
This is an excellent opportunity for an experienced professional who wants to take on a technically challenging role with strong long-term growth potential. This position focuses exclusively on civil and structural engineering (not electrical) and offers a steep learning curve with exposure to a wide range of design and construction activities, including civil works related to Building Management Systems (BMS).
Be sure to have them submit you as a referral prior to applying for this position via Talent Spotter scheme Note to recruitment agencies: Oxford Instruments Andor operates a Preferred Supplier List, and we do not accept unsolicited agency CVs.
Wo Du mit anpacken kannst Als DevOps Engineer bist Du unsere Schnittstelle zwischen Software-Entwicklung und IT-Infrastruktur.Du gestaltest und konzeptionierst federführend die Verknüpfung verschiedener Tools von der Code-Basis bis hin zum Roll-Out unserer Software-Produkte.Dabei mischst Du maßgeblich bei der Automatisierung und Optimierung von Prozessen und Arbeitsabläufen mit, insbesondere wenn es um die Continous Integration oder Continous Delivery/Continous Deployment geht.Du unterstützt Dein Team beim Integrieren von Applikationen und berätst bei der Umsetzung von automatisierten Testabläufen sowie dem Aufbau von IT-Infrastrukturen.Diese Position kann zu 100% aus dem Home-Office ausgeübt werden. Du musst also nicht in Thüringen oder der näheren Umgebung wohnen. Entscheide selbst, wann und wo Du arbeiten willst.Eine Teilzeitanstellung ist für uns auch kein Problem, jedoch wäre es ideal, wenn Du wöchentlich mindestens 30 Stunden Deiner Zeit für uns opfern könntest.
Follow up on the KPIs related to their area of responsibility and take the necessary actions to comply with them.Ensure compliance with the requirements related to the position indicated in the IATF 16949, ISO 14001 and ISO 45001 standards, specific customer requirements and the legal requirements of the area.Actively participate in the processes of Continuous Improvement and root cause analysisDaily monitoring of the client's portals, or any other logistical notification received by them electronically or by other means, ensures that the required information is uploaded into the customer portals and on the Q-module on SAP.
Create your future by joining our Graduate Trainee Program where you will have the opportunity to work on a full-time contract position for18-months. Upon successful completion of theprogram,you stand a chance to be shortlisted for exciting job opportunities based on your career aspirations, your performance and also on business needs and available vacancies.
Create your future by joining our Graduate Trainee Program where you will have the opportunity to work on a full-time contract position for 18-months. Upon successful completion of the program, you stand a chance to be shortlisted for exciting job opportunities based on your career aspirations, your performance and also on business needs and available vacancies.